EEPROM TEST Adapters
Pogo-pin, spring loaded holders for in-circuit EEPROM programming

EEPROM test adapters

Most of the modern instrument clusters and airbag control modules store data on the EEPROMs different package sizes. We designed the pogo-pin spring loaded touch holder for in-circuit programming of EEPROMs using Smelecom EEPROM or D80/D160 adapters. This is an extra accessory and isn't included into any Smelecom package. For convenience the holder comes with DIP8 adapter to be used on any stand alone programmer featuring ZIF socket. The ribbon cable length is 50 centimeters. Just position, press and hold the spear point over the EEPROM pins or PCB points and read/write/verify it!

No mess left around EEPROM, the connection is invisible and steady! Pin #1 is marked with red dot. The device programmer featuring pin connection check is recommended to be used with these adapters.

$100
usd

DIP8 3M test clip

DIP-8 test clip is the first clip designed for in-circuit reading of traditional EEPROM size in DIP body. Steady connection guaranteed by 3M technology featuring strong spring. This is the most popular test clip ever since 2000 when most instrument clusters manufactures started to use DIP8 EEPROMS for data storage.

Order
$100
usd

SOIC8 Pomona test clip

SOIC8 a traditional test clip for in-circuit programming of EEPROM. No needs to desolder chip or solder to the PCB points. Just clean the EEPROM pins and place the clip on top of memory. Pomona clip features gentle spring that gives more flexability on connection.

Order
$100
usd

SOIC8 3M test clip

SOIC8 a traditional test clip for in-circuit programming of EEPROM. No needs to desolder chip or solder to the PCB points. Just clean the EEPROM pins and place the clip on top of memory. 3M clip features more strong spring that helps the clip seats more firmly even when you move the PCB or cable.

Order
$120
usd

NISSAN Touch Holder (t-01)

Nissan 6-pin pogo-pin touch holder designed for connecting to the standard j-tag port found on most Nissans/Infiniti instrument clusters circuit boards. No need to remove the needles, no need to disassemble the speedometer. Just locate 6 points and make a secure connection.

Order
$120
usd

toyota Touch Holder

Toyota's (Tundra, 4Runner and Prius) instrument clusters have 6-points EEPROM J-Tag port to program memory in-circuit eliminating of disassembling the entire cluster and removing needles. This holder designed to connect to EEPROM fast and accurate. Ground pin is marked black.

Order
$140
usd

SOIC8 Touch Holder

This is a SOIC-8 test pogo-pin touch holder for fast and steady connection to a most popular EEPROM size found on automotive electronic units such as airbag modules, ECUs and instrument clusters. Almost invisible connection provided by sharp pins gives the accurate result and convenience of operation.


Order
$160
usd

TSSOP8 Touch Holder

The most demanded size of EEPROMs used in airbag systems (SRS modules) can now be programmed in-circuit using this spring loaded pogo pin adapter. No needs to desolder memory or solder to the PCB points. Just clean the EEPROM with acetone and gently connect adapter's needles over the memory pins.


Order
$180
usd

msop8 Touch Holder

The smallest 8-pins EEPROM in MSOP package can be programmed using this revolutionary adapter. It is an extremely hard to make a connection to this tiny memory found on instrument clusters of new Toyota, Lexus, Jeep, Acura, Honda, Hyundai, KIA. This touch holder is the only tool to save your time and make strong and undetectable connection.
Order

$120
usd

Touch Holder 2 (T-02)

Designed for read/write the DIP8 EEPROM from the back of circuite board(in crossover mode). Prevents removing needles and disassembling instrument cluster.



Order
$120
usd

Touch Holder 3 (T-03)

Designed for Read/Write 912/9S12 microcontrollers using standard BDM port found on many Fords/Chryslers/Nissans instrument clusters.


Order

$120
usd

Touch Holder 4 (T-04)

Designed for Read/Write 912/9S12 microcontrollers using standard BDM port (reversed version) found on many Fords/Chryslers/Nissans instrument clusters.


Order

Advantages

eeproms

93xx, 25xx, 35xx, 24xx, 95xx, 35xxx, D80, D160 and others

SPECIALS

The set of three holders (SOIC8, MSOP8, TSSOP8) + one DIP socket adapter for a price of $400 USD!

The set of five holders (Nissan, Toyota, SOIC8, MSOP8, TSSOP8) + one DIP socket adapter for a price of $600 USD!

Buy Now!